DecorFlex Seal sealant

DecorFlex Seal sealant

aron tex sealant

DecorFlex Seal sealant

"Reinforcing mesh" in the form of mass.


tömít, szigetel First and foremost, it is used to arm and renovate scratches and cracks in the plaster and cracks in plasterboard or in fireplaces. It's also used to lute connection of stucco.


  • Water-dilutable
  • Does not include volatile organic solvents
  • Intended to use outdoor and indoor
  • High resistance to weathering
  • Easy to applicate
vízszigetelés, hézag tömítés Fill the gaps on profiles and the gap between the wall and mounted profiles with DecorFlex Seal. The result is durable decoration protected from water, rain and weather.
Price: 0,00Ft

DecorFlex Seal
order code A-TEX03
description greasy sealing mass

colour

black

packages

300 ml cartouch

density [g/cm3]

1.0 - 1.6

pH

8 - 9

flow of the mass [mm]

0

flexibility of coating (about 5 mm thick)

180o

flexibility (as above) after thermal ageing

180o

flexibility (as above) after higrothermic ageing

180o

flexibility (as above) exposed to temperature variables

180o

flexibility (as above) after 7 days of immersion in water

180o

occurrence of contraction scratch in the layer up to 10 mm

no scratches

shrinkage during drying [%]

0.02

adhesion of paint Lusso Premium with the mass DecorFlex Seal to the ground 
(in parentheses after aging) [MPa]
concrete
ceramic brick
cellular concrete
lime-cement plaster
reinforcing layer insulation „Ceresit”



2.1 (2.3)
1.,8 (1.3)
2.0 (1.5)
1.71 (1.6)
1.53 (1.43)

polishing the mass

total

usefulness for painting (with paint of Lusso Premium, enamel, dispersion varnish)

total

place of origin

EU

Certification
DecorFlex Seal was tested by The Centre of Research and Development - Paints, Adhesives and Polymers SPEKTROCHEM and meets the requirements of the standard: PN-EN ISO 11600:2004 "Construction structures. Products for sealing. Classification and requirements for putties".Spektrochem clearance: 169/2014.

How to apply

The mass should be applied undiluted on dry, clean and firm ground.
The work done at the base and ambient temperature of 10 - 20 oC on the not sunny surface, days free from rain and fog. After complete drying the surface can be sanded.
Clean tools with tap water immediately after completion of the works.

Storage

In the original packaging of the product retains its properties for 12 months from the date of manufacture. Keep at a temperature of 10 - 30 oC in factory sealed packages.
Protect from frost and excessive sun exposure!
The mass is not combustible.

Standards and certificates

This product was tested by The Centre of Research and Development - Paints, Adhesives and Polymers SPEKTROCHEM and meets the requirements of the standard: PN-EN ISO 11600:2004 "Construction structures. Products for sealing. Classification and requirements for putties".

Spektrochem clearance No. 169/2014.

Copyright (c) Digit Bt., All rights reserved - www.nagyformatumu.hu/en/ - contacts - en